|
|
Overview
ForceField®
Extraction Plus is a superior
carpet fiber
shampoo. It cleans and protects fine carpets, rugs and
upholstery. It is the ideal product for cleaning carpet.
By pre-spraying the fibers and allowing the specially
formulated product to break down the soils and stains and
then use fresh water to extract, ForceField® Extraction
Plus will deep clean the fibers and provide
anti-soiling properties to the fibers. Carpets and fibers
will stay cleaner looking longer. Carpet and fibers will
remain soft, never stiff or sticky. During the extraction
process there is no need to use a rinse agent in the tank.
How &
Why ForceField® Extraction Plus Works
Most cleaning
solutions are based upon cationic chemistry, that is, they
contain positively charged cleaning agents. Although they
may clean with varying degrees of success, they leave
behind a positively charged residue. This residue acts
like a magnet and attracts soils and dirt (which are
negatively charged), causing re-soiling of the area.
Extraction Plus is different. By combining specially
selected nonionic and anionic surfactants with our unique
fluorocarbon anti-soiling chemistry, Extraction Plus
is able to deep clean fabric fibers while leaving a
protective treatment on the surface and eliminating the
soil-attracting residues that other cleaners leave behind.
Extraction Plus not only cleans, it helps carpets,
rugs, upholstery, clothing, and other fibers to stay
cleaner, longer.
Applications
Always test for compatibility with,
and the colorfastness of, the surface to be cleaned by
applying a small amount of the product to an inconspicuous
area. Extraction Plus can be used on all water-safe
fabrics, including
upholstery, clothing, carpets, rugs, car mats, cushions,
and more. Extraction Plus can be diluted and used as a
spotter, a pre-spray, in truckmounts supply tanks or
other types of carpet cleaners.
As a pre-spray allow
Extraction Plus to dwell on the area for 5 to 10
minutes to penetrate into the fibers and loosen the soil.
Used as a spotter spray spot or stain, using a clean cloth
or sponge blot affected area. Allow the area to dry for 15
to 30 minutes. For stubborn stains, it may be necessary to
repeat the cleaning process and/or softly brush the area
during application.
Available in the Following
Sizes
1
Gallon 5 Gallon 55 Gallon
|
|
●
Stains Will Not Reappear After
Cleaning
●
Restores and Enhances the
Anti -
Soiling Properties
●
Perfect for High Traffic
Areas
●
Woolsafe Approved
●
No Need to Use a Rinse
Agent
●
Works on Oil-Based and
Water-Based
Stains
●
Use as a Pre-spray or as a
Detergent
in an Extraction Tank
●
Cleans Difficult Stains and Spills,
Even Removes Old Stains
|
