Fabric Cleaner

Makes Stains and Soils Vanish




ForceField® Fabric Cleaner is the finest fabric and fiber cleaner on the market today. ForceField® Fabric Cleaner removes the toughest soils and stains from water-safe materials; even old stains come clean. More than its ability to effectively clean, what makes ForceField® Fabric Cleaner so special is that stains will not reappear after cleaning and the cleaned area will actually repel dirt and grime to prevent re-soiling.

How & Why ForceField® Fabric Cleaner Works

Most cleaning solutions are based upon cationic chemistry, that is, they contain positively charged cleaning agents. Although they may clean with varying degrees of success, they leave behind a positively charged residue. This residue acts like a magnet, and attracts soils and dirt (which are negatively charged), causing re-soiling of the area.  ForceField® Fabric Cleaner is different. By combining specially selected nonionic and anionic surfactants with our unique fluorocarbon anti-soiling chemistry, ForceField® Fabric Cleaner is able to deep clean fabric fibers, leave a protective treatment on the surface, and eliminate the soil attracting residues that other cleaners leave behind. ForceField® Fabric Cleaner not only cleans, it helps keep carpets, rugs, upholstery, clothing, and other fibers cleaner, longer.


Always test for compatibility with, and the colorfastness of, the surface to be cleaned by applying a small quantity of the product to an inconspicuous area. ForceField® Fabric Cleaner can be used on all water-safe fabrics, including: upholstery, clothing, carpets, rugs, car mats, cushions, and more. ForceField® Fabric Cleaner can be diluted and used with extraction or other types of carpet cleaners.


After removing loose or dry soil and blotting up wet stains with a clean cloth or sponge, apply ForceField® Fabric Cleaner to the soiled area. Allow ForceField® Fabric Cleaner to remain on the area for 1 to 5 minutes to penetrate into the fibers and loosen the soil. Blot excess product from the surface using a clean cloth or sponge. Allow the area to dry for 15 to 30 minutes. For stubborn stains, it may be necessary to repeat the cleaning process, and/or softly brush the area during application.

Also available in the following sizes - 4oz,

                      1 Gallon              5 Gallon           55 Gallon


·  Penetrates Deep Into Fibers    


·  Removes Both Oil &

Water-Based Stains

·  Stains Will Not Reappear          

·  WoolSafe® Approved – Safe for Carpets

·  Use in Extraction Cleaners      

·  Protective Barrier Prevents Re-Soiling




HMIS  Health: Fire: Reactivity: 0

Appearance: Clear to Light Yellow Liquid

pH: 7.0 to 8.0

Odor: Pleasant, Fresh, and Clean

Solubility: Completely Water Soluble

Specific Gravity: 1.00 +/- 0.02  (8.34 lbs/gal)

Boiling Point: >100°C

Chemical Family: Aqueous Surfactant Blend

Storage: Above 0°C, Below 50°C

Caution: Keep out of the reach of children.

Regulatory: Not Regulated

Caution: Use on water-safe materials only.


Shield Industries, Inc.  ●  131 Smokehill Lane, Woodstock, GA 30188

Phone: 800 332 6327  ●  Fax 770 517 6863   ●



Printable MS Word TDS (Click Here)