·  Deep Cleans Grout & Tile


·  Removes Soap Scum, Stains & Grime


·  Environmentally Friendly


·  Safe on Most Hard Surfaces


·  Noncorrosive, Non-Fuming

·   No Bleach, Nonphosphate Formula





ScumBlaster™ is the most effective Tub & Tile Cleaner you will ever use. More than a bathroom cleaner, it can be used wherever hard water deposits or soap scum are a problem. Dull surfaces become shiny and squeaky clean. The cleaning power of ScumBlaster™ is comparable to that of muriatic (hydrochloric) acid, yet this noncorrosive formulation is environmentally friendly, non-fuming, and safe for septic tanks. ScumBlaster™ has the power to make hard water deposits, stains, scum, and grime disappear.

How & Why scumblaster™ Works

Hard-water deposits and soap-scum residues on tubs, ceramic tile, and other hard surfaces are caused by the presence of calcium. Well water or hard municipal water sources makes these problems worse. ScumBlaster™ has been formulated using an organic salt that was designed as a safe replacement for traditional acids in industrial applications. By combining this unique material with special low pH surfactants, ScumBlaster™ has the ability to dissolve stubborn deposits and clean even the toughest stains, mold, or mildew.


Because ScumBlaster™ is such a strong cleaner, always test for compatibility with the surface to be cleaned by applying a small quantity of the product to an inconspicuous area. ScumBlaster™ can be used on a wide range of surfaces: showers, tubs, tile, grout, fiberglass, plastic, glass, rubber, porcelain, vinyl, and a variety of synthetic surfaces. ScumBlaster™ is excellent for use in homes, businesses, schools, boats, hotels, patios, and many other areas.  Use care when applying to metallic or metal plated surfaces, as ScumBlaster™ works upon contact on these surfaces and should be promptly and thoroughly rinsed after application. While not required, persons with sensitive skin should wear rubber gloves when using this product.

Spray ScumBlaster™ onto the surface to be cleaned, wipe with a damp cloth or sponge, and thoroughly rinse with water. For tougher build-ups or stains, repeat application or wait 1 to 3 minutes before wiping and rinsing.

Also Available in the Following Concentrated Sizes

                          1 Gallon           5 Gallon            55 Gallon




HMIS  Health: Fire: Reactivity: 0

Appearance: Clear Pale Yellow Liquid

pH: Less than 1.5

Odor: Mild Sweet

Solubility: Completely Water Soluble

Specific Gravity: 1.04 +/- 0.02  (8.67 lbs/gal)

Boiling Point: 100°C

Chemical Family: Organic Salt

Storage: Above 0°C,  Below 50°C

Caution: Keep out of the reach of children.

Regulatory: Not Regulated

Caution: Tightly close bottle when not in use.


Shield Industries, Inc.  ●  131 Smokehill Lane, Woodstock, GA 30188

Phone: 800 332 6327  ●  Fax 770 517 6863   ●



Printable MS Word TDS (Click Here)