ForceField®

UV SunBlock

Sun/UV Protectorant for Fabric

 

 

·   Helps Prevent Fabric Fading

 

·   Protects Against Damaging

UV Rays

· Actually Absorbs the Sun’s Rays

· Works Well With Mill Treatments

· Safe On All Materials; Dries Fast

·  Use On: Draperies, Upholstery & Rugs

 

 

OVERVIEW

UV SunBlock™ is designed to help prevent the fading of colors and the degradation that can result when fiber surfaces are exposed to the sun’s damaging ultra-violet rays. Ideal for a wide range of applications: drapes, tapestries, rugs, carpets, patio furniture, upholstery, sheers, clothing, auto interiors, and more. Treated surfaces retain color vibrancy and maintain a new appearance longer. UV SunBlock™ is perfect for use on indoor and outdoor surfaces, and is effective on natural, synthetic, and blended fibers.

How & Why UV Sunblock™ Works

More than just blocking the sun’s ultra-violet rays, UV SunBlock™ actually protects fiber surfaces by absorbing the energy from these damaging rays and then releasing it back out in a harmless form. UV SunBlock™ stops UV rays at the surface, preventing them from reaching the protected surfaces.

Applications

Always test for compatibility by applying UV SunBlock™ to an inconspicuous area of the surface to be treated. For best results, apply to new or clean surfaces. As this is a solvent-based product, exercise proper caution by applying either outdoors, or in a well-ventilated area. Do not spray near flame, sparks, heated surfaces, or other potential sources of ignition. Avoid excessive airborne mist. Do not apply using high-pressure spraying equipment. Holding the sprayer 6 to 12 inches away from the surface to be treated, spray a sufficient quantity of UV SunBlock™ to evenly wet the surface. Recommended coverage is 1 ounce per 8 to 10 square feet of surface.  Treated surfaces are dry to the touch in 2 to 4 hours and completely cured in 24 hours.

 

For applications where both UV and soil/stain protection are desired, UV SunBlock™ can be used in conjunction with ForceField® Fabric Protector. While order of application is not critical, we suggest that UV SunBlock™ be applied first.

 

 

Outdoor surfaces exposed to the elements should be re-treated once per year after cleaning.

Available in the following sizes

                                        5 Gallon         55 Gallon

             

 

HMIS  Health: Fire: Reactivity: 0

Appearance: Clear Light Yellow/Amber Liquid

pH: NA (Solvent Based Product)

Odor: Mild Petroleum

Solubility: Insoluble

Specific Gravity: 0.75 +/- 0.02  (6.25 lbs/gal)

Boiling Point: 150°C (Flashpoint 40°C)

Chemical Family: UV Absorber in Solvent

Storage: Below 35°C, Well-ventilated

Caution: Keep out of the reach of children.

Regulatory: Regulated for Air Shipment

Caution: Combustible Liquid, Avoid Flame.

 

Shield Industries, Inc.  ●  131 Smokehill Lane, Woodstock, GA 30188

Phone: 800 332 6327  ●  Fax 770 517 6863   ●   www.shieldindustries.com

 

MSDS

Printable MS Word TDS (Click Here)