Shaw R2x Green       

Stain & Soil Remover  

 

 

 


 

OVERVIEW

R2x Green Stain & Soil Remover is U.S. E.P.A. approved forDesign for the Environment” and recognized for safer chemistry. An environmentally friendly formula that is approved for use on stain resistant carpet, rugs, wool and water safe fabrics.R2x Green Stain & Soil Remover removes the toughest soils and stains from water-safe materials. Even old stains come clean. More than its ability to effectively clean, what makes R2x Stain & Soil Remover so special is that stains will not reappear after cleaning, and the cleaned area will actually repel dirt and grime to prevent re-soiling. There is no reason to rinse.

How & Why R2x Green Stain & Soil Remover Works

Most cleaning solutions are based upon cationic chemistry, that is, they contain positively charged cleaning agents. Although they may clean with varying degrees of success, they leave behind a positively charged residue. This residue acts like a magnet and attracts soils and dirt
(which are negatively charged), causing re-soiling of the area. R2x Green Stain & Soil Remover is different. By combining specially selected nonionic and anionic surfactants, R2x Green Stain & Soil Remover is able to deep clean fabric fibers while leaving a protective treatment on the surface and eliminating the soil-attracting residues that other cleaners leave behind. R2x Green Stain & Soil Remover not only cleans, it helps carpets, rugs, upholstery, clothing, and other fibers to stay cleaner, longer.

Applications

Always test for compatibility with, and the colorfastness of, the surface to be cleaned, by applying a small amount of the Stain & Soil Remover to an inconspicuous area. R2x Green Stain & Soil Remover can be used on all water-safe fabrics, including upholstery, clothing, carpets, rugs, car mats, cushions, and more.   

 

Allow R2x Stain & Soil Remover to dwell on the area for 5 to 10 minutes to penetrate into the fibers and loosen the soil. Used as a spotter, spray spot or stain, using a clean cloth or sponge blots affected area. Allow the area to dry for 15 to 30 minutes. For stubborn stains, it may be necessary to repeat the cleaning spotter process and/or softly brush the area during application.

Also Available in the Following Sizes

                                               1 Gallon                5 Gallon          

                                                         

 

Text Box: ·    Penetrates Deep Into Fibers

 
·    Design for the Environment 

 
·    Removes Both Oil- and 
   Water-Based Stains

 
·    Stains Will Not Reappear

 
·     Safe for all Water Safe Fabrics

 
·    No Need to Rinse
 
 
 
 
 
 
 

 

 

 

 

 

HMIS  Health: Fire: Reactivity: 0

Appearance: Clear to Light Yellow Liquid

pH: 7.5 to 8.5

Odor: Pleasant, Fresh, and Clean

Solubility: Completely Water Soluble

Specific Gravity: 1.00 +/- 0.02  (8.34 lbs/gal)

Boiling Point: 212°F

Chemical Family: Aqueous Surfactant Blend

Storage: Above 32°F,  Below 90°F

Caution: Keep out of the reach of children.

Regulatory: Not Regulated

Caution: Use on water-safe materials only.

 

Shield Industries, Inc.  ●  131 Smokehill Lane, Woodstock, GA 30188

Phone: 800 332 6327  ●  Fax 770 517 6863   ●   www.shieldindustries.com

 

MSDS

Printable MS Word TDS (Click Here)