Shaw® R2x®         

Hard Surfaces Floor Cleaner

 

 

 

OVERVIEW

Shaw® R2x Hard Surfaces Flooring Cleaner is specially formulated for cleaning all types of hard surface flooring including Hardwoods (with polyurethane finish), Ceramics, Laminate and Vinyl Flooring.  It is ideal for removing dirt, grease, and scuffs. Leaves floors sparkling clean with no sticky or dulling residue.

This product is designed to be used at full strength as packaged.  There is no need to rinse this product.

How & Why R2x Hard Surfaces Flooring Cleaner Works

Most cleaning solutions are based upon cationic chemistry, that is, they contain positively charged cleaning agents. Although they may clean with varying degrees of success, they leave behind a positively charged residue. This residue acts like a magnet and attracts soils and dirt (which are negatively charged), causing re-soiling of the area. R2x Hard Surfaces Flooring Cleaner is different. By combining specially selected nonionic and anionic surfactants with our unique fluorocarbon anti-soiling chemistry, R2x Hard Surfaces Flooring Cleaner is able to clean floors while leaving a protective treatment on the surface and eliminating the soil-attracting residues that other cleaners leave behind.

Applications

To be used in daily or weekly floor maintenance care. Always sweep or vacuum floor to remove loose dirt before cleaning. Lightly mist a 4’ x 4’ area of floor surface. Do not saturate floor. Using a back and forth motion, wipe mist off of the floor with a clean terry cloth mop or towel. Finish one are before moving to the next. When terry mop or towel becomes soiled replace it with a clean one.

This product is suitable only for hardwood floors with a polyurethane finish. Do not use on unfinished/unsealed or waxed wooden floors.

Available in the Following Sizes

                                  1 Gallon          5 Gallon          55 Gallon

             

 

·  Brightens and Preserves Finishes

·  Leaves no Sticky or Dulling Resides

·   Safe for Hardwoods (with polyurethane finishes),Laminates, Ceramic and Vinyl Flooring

·   No Need to Rinse

·   Removes scuffs, dirt and Grease

 

HMIS  Health: Fire: Reactivity: 0

Appearance: Light Yellow/Orange Liquid

pH: 7.0 to 8.0

Odor: Pleasant, Fresh, and Clean

Solubility: Completely Water Soluble

Specific Gravity: 1.00 +/- 0.02  (8.34 lbs/gal)

Boiling Point: >100°C

Chemical Family: Anionic Surfactant Blend

Storage: Above 0°C,  Below 50°C

Caution: Keep out of the reach of children.

Regulatory: Not Regulated

Caution: Use on water-safe materials only.

 

 

Shield Industries, Inc.  ●  131 Smokehill Lane, Woodstock, GA 30188

Phone: 800 332 6327  ●  Fax 770 517 6863   ●   www.shieldindustries.com

 

SDS

Printable MS Word TDS (Click Here)